manualshive.com logo in svg

Hitachi L32VK06U, Service Manual

Share
Download
Hitachi L32VK06U Service Manual Download Page 26

HDMI Transmitter

- Industry-standard compliance:

• HDMI 1.3 with x.v. Colour
• DVI 1.0
• EIA/CEA-861D
• HDCP 1.1

- Integrated HDMI TMDS core running at 165 MHz (support up to 1.65 Gbps) 

Peripherals support

- Two asynchronous 16550 UARTs
- One other UART
- Clocked Serial Interface
- Two ISO 7816-3 compliant Smart Card interfaces
- Two I2C compatible interfaces
- Two infrared receiver interfaces and one transmitter
- Programmable Pin Port shared with other peripherals (152 channels maximum) 

Timers

- Two timers supporting input capture and output compare
- Two system timers, a real time clock and a watchdog timer 

USB 2.0

- USB 2.0 high speed host controller/PHY interface – 1 channel 

Ethernet

- 100BT Ethernet controller with integrated MAC and /RMII interface for external PHY
- Supports 10/100 Mbps and full duplex operation 

Package

- 596-pin, 1 mm pitch PBGA (Plastic Ball Grid Array) 

Summary of Contents for L32VK06U


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands