manualshive.com logo in svg

Hitachi L32VK06U, Service Manual

Share
Download
Hitachi L32VK06U Service Manual Download Page 16

Checking Of The New Software 

1. Turn off and on the TV.
2. Enter the “Setup” submenu in the “DTV Menu”.
3. Choose the “Configuration” option.
4. For controlling new software, check the “Receiver Upgrade” option.

1.4.

17MB38 Digital Software Update From USB

Software upgrade is possible via USB disk by folowing the steps below.

1. Copy the bin file, including higher version than the software loaded in flash, into the 

USB flash memory root directory. This file should be named  

force_upgrade.bin

.

2. Insert the USB disk.
3. Digital module performs version and CRC check. If version and CRC check is 

successful, then a message prompt appears to notify user about new version. If the 
user confirms loading of new version, upgrade.bin  file is written into flash unused 
slot.

4. Digital module disables the previous software in the flash and then a system reset 

is performed.

5. After the reset, digital module starts with new software.    

Summary of Contents for L32VK06U


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands