1
Overview
KP-F145WCL are CameraLink output type black and white camera which utilized the 2/3 –inch progressive scan CCD
image sensor with square pixel.
It provide images of unparalleled quality at 30 frame per second non-interlaced output.
Because square pixel CCD is adopted, the image that is appropriate for the picture processing is obtained.
Standard composition
Check when unpacking
Camera ··································································································· 1
Composition table ··············································································· 1
Features
・High resolution
The 2/3-inch 1,450,000 pixels square lattices CCD achieve a high resolution.
・Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to 44(W) x 44(H) x
41(D) mm / approx. 110g.
・Automatic power supply change
The power supply through the cameralink cable is possible from the PoCL frame grabber board. Because the power supply
from the DCIN/SYNC connector is also possible, it is possible to make the camera work by using usual frame grabber board.
The power supply from the DCIN/SYNC connector is given to priority when the power supply is supplied from both..
System example
KP-F145WCL connect to frame grabber board using CameraLink cable.
HITACHI
HITACHI
AC adaptor
Power over type CameraLink
frame grabber board
CameraLink
frame grabber board
Power over type
Mini-CameraLink cable
Mini-CameraLink cable
Optional accessories
(1) 12 pin plug
HR10A-10P-12S(01)
(2) Junction box
JU-F30/JC-100
(3) Dummy glass (AR coated) ARC1214
(4) IR cut filter
IRC650
(5) Tripod adaptor
TA-F500
(6) Mini-CameraLink cable
(7) Camera cable
Molded type
Shield type
2m
C-201KSM
C-201KSS
5m
C-501KSM
C-501KSS
10m
C-102KSM
C-102KSS
In the CE Marking region, use the shied type and install
clamp filter (ZCAT 2035-0930A: TDK) at both ends
(camera and video processor ends).
Summary of Contents for KP-F145WCL
Page 6: ...E ...
