Hitachi HF-BT1000, User Manual, Page: 84 / 129

5. CONTROLLING THE HARDWARE
5-5
5.3 RAID Configuration Control Command (raidctrl) [D Model only]
The raidctrl command shows the status of the RAID and its drives and configures the setting
for whether to notify a media error. The following shows how to use this command. This
command can be launched at the command prompt.
<Name>
raidctrl - RAID drive status display and configuration control, media error notification
setting update
<Syntax>
raidctrl [/NOTIFY {ON|OFF} ]
<Description of the function>
This command offers one of the following functions depending on the specified options.
• With no options: The status of the RAID and the drives in the RAID will be displayed.
• When /NOTIFY option is specified: The command configures the setting for whether to
notify when a media error is generated.
NOTE
• You need to have administrator privileges to execute the following actions.
Log on to the computer using an administrator account to do so. If User
Account Control (UAC) is enabled, start the command prompt as an
administrator according to “APPENDIX A RUNNING COMMAND PROMPT
AS AN ADMINISTRATOR”, and then execute the raidctrl command.
In addition, you cannot execute those actions from a remote session.
• Do not run multiple instances of this command at the same time.