Hitachi HF-BT1000, User Manual

Page: 119 / 129

8. SIMULATING THE HARDWARE STATUS
8-8
z
End button
If you click this button, shutdown is executed to exit the simulation mode. Before
shutdown is executed, the following message is displayed. Save the data, for example,
and then click
OK
. If you click
Cancel
, the
Simulation Tool
window does not exit.
NOTE
Even if the Simulation Tool window exits due to an internal error or the like,
shutdown is executed automatically to exit the simulation mode. Before
shutdown is executed, the following message is displayed. Save the data, for
example, and then click
OK .
z
Minimize button ([_] button)
Click the
Minimize
button at the upper right corner of the
Simulation Tool
window
to minimize the
Simulation Tool
window. Note that when the window is minimized,
the simulation mode does not exit.
z
Close button ([×] button)
Click the
Close
button at the upper right corner of the
Simulation Tool
window to
execute shutdown and exit the simulation mode. The behavior after this button is
clicked is the same as when you click
End
.