Hitachi HA800 Series User Manual Download Page 52

Page: 52 / 57

Troubleshooting 52

Remove the USB key.

Reboot the system and press

F10

(IP Recovery) to verify IP Recovery launches properly.

Solution 2

Cause

The iLO is running in FIPS mode.

Action

Enter the iLO configuration screen and turn off FIPS mode.

Boot the server into F10 mode.

After making all changes, enable FIPS mode.

Intelligent Provisioning PXE flashing doesn't re-image Always On Intelligent

Provisioning

Symptom

Intelligent Provisioning PXE flashing doesn't re-image Always On Intelligent Provisioning
Note: User should follow the above said command lines only for the reference and are not recommended

to copy the same

Action

Update the Kernel command line with the word "Install". For example:

linuxefi /IP3.30/vmlinuz media=net splash quiet iso1=http://

192.168.100.101/iso/IP330.2019_0103.230.iso iso1mnt=/mnt/bootdevice

nicmac=5c:b9:01:c5:43:d0 install

echo 'Loading initial Ramdisk...'

initrdefi /IP3.30/initrd.img

NOTE:

Modify the example to fit your system's details.

OS Host name field missing

Symptom

The OS Host name field on the

Intelligent Provisioning Assisted Install > OS selection

page is

missing.

Summary of Contents for HA800 Series


























































Search results

Summary of Contents for HA800 Series

Reviews:

Related manuals for HA800 Series

Brands by name

Popular brands

Hitachi HA800 Series, User Manual

Search results

Summary of Contents for HA800 Series

Reviews:

Related manuals for HA800 Series

Brands by name

Popular brands