Hitachi HA800 Series User Manual Download Page 14

Page: 14 / 57

F10 mode options

Reinstalling from an ISO image

Procedure

Download the ISO image file for the latest Intelligent Provisioning recovery media by clicking

Download

from the Intelligent Provisioning website

(

https://support.hitachivantara.com/en/user/answers/downloads.html#hardware-

download

NOTE:

The following servers and Intelligent Provisioning versions are supported:

• HA800 supports Intelligent Provisioning 3.x.

To download the ISO image file, complete the onscreen instructions.

Mount the ISO file in one of the following ways:

• Using iLO virtual media.
• Burn the Intelligent Provisioning recovery media ISO file to a DVD and place it in the CD/DVD drive

of the server.

To power up the server Press ON.

To display the boot menu, press

F11

during server POST.

Press

on the keyboard to boot from the CD/DVD.

To update or reinstall Intelligent Provisioning, select the interactive method. The server continues

booting from the Intelligent Provisioning recovery media.

Select Reinstall Intelligent Provisioning when the window opens.

Reboot the server when the installation is complete by pressing

F10

Reinstalling from an RPM package (Linux only)

Procedure

Download the RPM package file for the latest Intelligent Provisioning recovery RPM package from

the SDR website

(

https://support.hitachivantara.com/en/user/answers/downloads.html#hardware-download

Execute the command:

rpm -i firmware-intelligentprovisioning-<version>.x86_64.rpm

Execute the command:

cd /usr/lib/x86_64-linux-gnu/firmware-intelligentprovisioning-ip-<version>/

Execute the command:

#./setup

Execute the command:

Summary of Contents for HA800 Series


























































Search results

Summary of Contents for HA800 Series

Reviews:

Related manuals for HA800 Series

Brands by name

Popular brands

Hitachi HA800 Series, User Manual

Search results

Summary of Contents for HA800 Series

Reviews:

Related manuals for HA800 Series

Brands by name

Popular brands