Hitachi EUP-O732T, Instruction Manual

Page: 27 / 35

-21- Q1E-EP1234
6. Maintenance and Safety Inspection
6.1 Daily Inspection
1) Visually inspect the surface of the probe head, housing, cable
and connector for any crack, scratch or denaturalization. If
you find any damage, do not use the probe and contact a service
support immediately.
2) Visually inspect the surface of the Magnetic sensor attachment
and the Spacer for EZU-RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use the
Magnetic sensor attachment and contact a service support
immediately.
6.2 Storage
After the using the probe, the Magnetic sensor attachment
and the Spacer for EZU-RV2S, They should be cleaned and
disinfected and sterilized following “
5. Cleaning, and
disinfection and Sterilization
”. Then store them in a cool and
dark place avoid high temperature and humidity direct
sunlight.