-10-
Q1E-EP0428
4.2.
Magnetic Sensor (EZU-RV3S)
The Magnetic sensor (EZU-RV3) as shown in Fig. 8 is also the Magnetic
sensor for the EUP-C514.
4.2.1.
How to attach the Magnetic Sensor
The procedure of attaching the Magnetic sensor is as follows.
1)
Confirm that the probe, the Magnetic sensor attachments are
disinfected or sterilized.
2)
Connect the probe, operate the ultrasound diagnostic scanner, and
adjust the image according to the instructions given in the operation
manual for the ultrasound diagnostic scanner.
3)
To use Real-time Virtual Sonography (RVS), attach the magnetic sensor
as shown below.
a)
Attach the Magnetic sensor into the probe with the correct direction
as shown in Fig. 9.
Fig. 8 Magnetic sensor (EZU-RV3S)
Magnetic sensor
(white)
Direction
mark
Fig. 9 How to attach the Magnetic sensor
Hole of the Magnetic
sensor attachment
Direction
mark of the
EZU-RV3S
Magnetic sensor
(EZU-RV3S: White)
Fit the
insertion
direction
