-21-
Q1E-EP0428
6.
Maintenance and Safety Inspection
1)
After using the probe, the probe should be cleaned and
disinfected or sterilized according to
“
5. Reprocessing
Procedure of the probe
”
, store the probe in a cool and dark
space to avoid high temperature, humidity and direct sunlight.
2)
Visually inspect the surface of the probe head, the housing, the
cable and the connector for any crack, scratch or denaturalization.
If you find any damage, do not use the probe, and contact a service
support immediately.
3)
After using the Magnetic sensor attachment and the Spacer for
EZU-RV2S, the Magnetic sensor attachment and the Spacer for EZU-RV2S
should be cleaned and disinfected or sterilized according to
“
6.
Reprocessing Procedure of the Magnetic Sensor Attachment
”
, store the
Magnetic sensor attachment and the Spacer for EZU-RV2S in a cool
and dark space to avoid high temperature, humidity and direct
sunlight.
4)
Visually inspect the surface of the Magnetic sensor attachment and
the Spacer for EZU-RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use them, and
contact a service support immediately.
