Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
Manual Rev. 0.0 - August 2016
5-13
5.4
Start up
The first screen that appears when powering ON the transmitter is:
(example display of 2900W Tx)
The First Presentation Screen shows the time of the manufactures and the model of the
transmitter, and the system it was set for. For the sample screen above:
Model: EC701HP - EC708HP
System: 8VSB ATSC
While no other key is pressed, these 2 presentation screens will be succeeding each other on
the LCD.
After pressing any key on the keypad, the Main Menu screen appears:
Notes
:
It is always possible to return to the previous LCD screen by pressing the ESC key.
After 5 minutes the initial LCD screen menu is displayed.
By the Main Menu, it’s possible to access all transmitter information, divided in five sections:
Setup, Measurements, System Alarms, Remote Access and Options.
5.5
Setup Menu
The SETUP screens permit the selection and changes on the configuration and operational
parameters.
The menu on the table follow profiles the possible operations under SETUP.