Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
Manual Rev. 0.0 - August 2016
5-1
5
Section 5
System Operation Manual
E-Compact ATSC Transmiitters
5.1
Introduction
The E-Compact ATSC transmitters provision:
(a) Measurements,
(b) Configurations,
(c) Alarms, and
(d) Remote control via microcontrollers.
Below is a detailed description about the operational software (configuration and operation)
system installed in the ATSC transmitters, located within of the exciter.
5.1.1 Front Panel
Figure 5-1
Exciter´s front view
On the front panel of the Exciter there is a LCD Display with 2 lines and 40 columns. Also a
circular keypad with a set of 4 command keys in gray color, and one centered, termed ENTER
on black color. An escape key, ESC, complete the set of 6 keys that allows an easy operator-
transmitter interaction.
Checking the LCD display is always possible to gather the operation status of many parameters,
and also, promote changes on some of these parameters using the 5 keys keypad.
5.2
Digital Exciter - The Master Control Unit
1
4
5
2
3
6