Hitachi DZ-B35A Instruction Manual Download

Page: 146 / 167

English

146

Operating sound is
heard cyclically.

This sound is heard because the disc is cyclically operated and
does not indicate a fault.

—

Some vibrations are felt
or slight sound is heard
from mechanism.

These vibrations or sound are caused by disc drive: This does
not indicate a fault.

—

•

No operation can be
performed because
the ACCESS/PC or
CARD ACCESS
indicator on this DVD
video camera/
recorder remains lit or
blinking.

•

After disc or card is
inserted, it takes
some time until
recording is possible.

In the following cases, it will take more time than usual until
operation is possible:

•

Immediately after a disc or card is reinserted.

•

When a long time has elapsed since the DVD video camera/
recorder was turned off last.

•

When the temperature is greatly different from the status of
previous recording.

•

When disc with scratches, dirt or fingerprints is inserted.

•

When disc is subject to severe vibrations.

•

When the battery or DC power cord was disconnected instead
of following the correct procedure using power switch to turn
the DVD video camera/recorder off.

—

No image in viewfinder.

Is LCD monitor open?
No image will appear in viewfinder unless the LCD monitor is
closed and securely locked to DVD video camera/recorder.

—

No image appears on
the LCD screen or in
the viewfinder.

•

Is DVD video camera/recorder connected to PC using PC
connection cable?
Unplug the PC connection cable.

•

Does DVD video camera/recorder stop at the end of the scene
to which wipe-out was set and played back?
Press the DISC NAVIGATION button.

•

Is the DVD video camera/recorder set to the sleep/restart
status?

—

Symptom

Cause and Correction

Reference

page

Summary of Contents for DZ-B35A








































































































































































Search results

Summary of Contents for DZ-B35A

Reviews:

Related manuals for DZ-B35A

Brands by name

Popular brands

Hitachi DZ-B35A, Instruction Manual

Search results

Summary of Contents for DZ-B35A

Reviews:

Related manuals for DZ-B35A

Brands by name

Popular brands