3-17
10.Press [CLEAR C.RESET] button on the remote
control unit.
Fig. 10 appears on the screen.
When “OK” appears on the screen, the factory
default will be set. Then the firmware renewal mode
is complete.
11.To exit this mode, press [POWER] button.
3-3-2 How to Verify the Firmware Ver-
sion
1. After making sure that no disc is in unit, turn the
power on.
2. Press [1], [2], [3], [4], and [DISPLAY] buttons on the
remote control unit in that order. The Firmware ver-
sion appears on the VFD and TV screen.
3. Turn the power off to reset the unit.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EXIT: POWER
EEPROM CLEAR : CLEAR
"*******" differ depending on the models.
Fig. 10
Summary of Contents for DV-PF35U
