5-5
5-1-3 How to Eject Manualy
A. DVD
1. Remove the Top Case, Front Assembly and Top Bracket.
2. Remove four Screws (S-3) in Fig. D3. Do not disconnect connectors.
3. While lifting up the DVD Mechanism, rotate the roulette in the direction of the arrow as shown below.
4. Pull the tray slowly manually.
B. Cassette Tape
1. Disconnect the AC plug.
2. Remove the Top Case and Front Assembly.
3. Make sure that the Moving guide preparations are in the Eject Position.
4. Turn the LDG Belt in the appropriate direction as shown below until the Moving guide preparations come to the
Eject Position. Stop turning when the preparations begin clicking or can not be moved further. However, the
tape will be left wound around the cylinder.
5. Turn the LDG Belt in the appropriate direction continuously, and the cassette tape will be ejected. Allow a
minute or two to complete this task.
View for A
Rotate this roulette in
the direction of the arrow
A
DVD Mechanism
View for B
B
Deck
Mechanism
LDG Belt
Moving guide T preparation
(Eject Position)
LDG Belt
Side View
Moving guide S preparation
(Eject Position)
UNLOAD
/EJECT
LOAD
Summary of Contents for DV-PF35U
