- 2 -
UK PLUG WARNING
IMPORTANT
The mains lead on this equipment may be supplied with a moulded plug
incorporating a fuse, the value of which is indicated on the pin face of
the plug. Should the fuse need to be replaced, an ASTA or BSI approved
BS1362 fuse must bu used of the same rating. If the fuse cover is
detachable never use the plug with the cover omitted. If a replacement
fuse cover is required, ensure it is of the same colour as that visible on
the pin face of the plug. Fuse covers are available from your dealer.
DO NOT cut off the mainsplug from tis equipment. If the plug fitted is
not suitable for the power points in your home or the cable is too short
to reach a power point, then obtain an appropriate safety approved
extension lead or consult your dealer.
Should it be necessary to change the mains plug, this must be carried
out by a competent person, preferably a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you
dispose of it immediately, having first removed to fuse, to avoid a
possible shock hazard by inadvertent connection to the mains supply.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following
code:
Blue :
NEUTRAL
Brown :
LIVE
As these colours may not correspond to the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with
the letter
N
or coloured BLUE or BLACK. The wire coloured BROWN must
be connected to the terminal marked with the letter
L
or coloured BROWN
or RED.
On no account connect either of these wires to the terminal marked E or
by the earth symbol
W
or coloured green or green and yellow.
Alternatively, this equipment may be supplied with a rewireable plug
already fitted, which may be removed if not suitable and an alternative
fitted in accordance with the preceding instructions.