- 23 -
¥
NOTE:
When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
When the player is restarted or the disc is changed,
the subtitle selection is automatically changed back
to the initial settings.
Changing Audio Soundtrack Language
It is possible to change the audio language from the
one selected at the initial settings to a different
language, if available.
(This operation works only with discs on which
multiple audio soundtrack languages are recorded,
if not prohibited by the DVD.)
Press AUDIO during playback.
Press AUDIO a number of times until the preferred
language is selected.
¥
NOTE:
When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
When the standby is turned on or the disc is
removed, the language heard is the one selected at
the initial settings. If this language is not recorded
on the disc, only the available language on the disc
will be heard.
Viewing From Another Angle
Some DVD discs may contain scenes, which have
been shot simultaneously from a number of
different angles. For these discs, the same scenes
can be viewed from each of these different angles
using the ANGLE button.
The number of recorded angles differs depending
on the disc used.
y/x is displayed shortly on the screen during
playback. This indicates that the multi-angle scene
has just started. Also on units display ANGLE
message appears. From that moment on, the
y
th
angle of total
x
angles is played and you can change
the viewing angle until the end of the multi-angle
scene.
In SETUP menu, an ANGLE MARK option exists,
which, if enabled, will display a continuous angle
mark on the screen as long as multi-angle scene is
available.
Press ANGLE during playback.
The current angle is changed
Press ANGLE a number of times until the preferred
viewing angle is selected.
¥
NOTE:
This function will only work on discs where different
angles have been recorded.
The viewing angles are shown on the screen. You
can select one from them for viewing.
If you press ANGLE outside of a multi-angle
scene on a multi-angle title,
´
is displayed. It
means that only one angle is currently available.
