- 19 -
DVD PLAYBACK
Preparations
Turn on your audio system if the player has been
connected to an audio system.
Basic Play
1. Press on the standby button
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its surfaces,
position it with the printed title side facing up, align
it with the guides, and place it in its proper position.
4. Press OPEN/CLOSE ( ) .
The disc tray is automatically closed and play
commences if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the film may start immediately after
the introduction of the Film Company. This
behaviour depends on the disc content and may
change.
¥
NOTE:
Step 5 and 6 is available only when a menu is
recorded on the disc.
5. Press
3
/
4
/
6
/
5
or the number button(s) to
select the preferred title.
6. Press SELECT.
Play of the selected items now starts.The played
item may be a motion picture, a still picture or
another submenu depending on the disc.
¥
NOTE:
When using menus the disc controls the behaviour
of the player.
For stopping play and returning to the menu screen
(when a menu is available on the disc), press MENU
or TITLE button depending on the disc. Play is
suspended, and the Disc menu screen is displayed.
After operation
When the unit is not in use, remove the disc and
press STANDBY to turn off the unit.
¥
NOTE:
The disc continues to rotate while the menu is
displayed even after the player has finished playing
a particular item. When no further selections are to
be played, be sure to press the STOP (
<
) button to
clear the menu display.
If the disc is placed in upside down ( and it is a single
sided disc), the VFD display on the player will
indicate BAD DISC .
For your reference:
If an action corresponding to a button is prohibited,
the
´
symbol appears.
Stopping Play
Press stop (
<
) twice.
When play is stopped, the unit records the point
where STOP (
<
) was pressed once (RESUME
function). Press PLAY / PAUSE again, and play will
resume from this point. When the tray is opened or
the STOP (
<
) is pressed again, the RESUME
function will be cleared.
To stop to play permanently, press STOP (
<
) twice.
When the STOP (
<
) button is pressed for the first
time, a message Press play to continue will appear
on the screen to remind you if you want to continue
to play. To stop to play press the STOP (
<
) button
again or you can press PLAY/ PAUSE to continue.
Fast Forward / Reverse
Press SEARCH/SLOW (
7
Fast reverse or
8
Fast forward ) on the remote control or Search
7
or
8
on the main unit during playback.
Normal play is resumed when the PLAY/PAUSE
button is pressed.
The speed of forward or reverse changes for every
press of the FF or FR button.
