Hitachi DV-P345UK, Instruction Manual

Page: 31 / 44

- 30 -
Repeat Play
Press REPEAT during playback.
Each time this button is pressed, a different repeat
box is displayed on the screen.
If “REPEAT TRACK” is displayed, the current track
will be played again.
If “REPEAT ALL” is displayed, the whole disc will
be played again.
If “REPEAT OFF” is displayed, the repeat mode
is disabled.
¥
NOTE:
If the play list is active, the playlist is repeated
instead of the whole disc in “Repeat All” case.
Repeating sections between two
specific points.(A – B repeat)
Press A-B during playback at the point where repeat
play is to commence (A).
“A TO B SET A” is displayed.
Press A-B again at the point where repeat play is to
be concluded (B).
“A TO B SET B” is displayed and the repeat-play
of the selection between points A and B starts.
To return to normal play:
Press A-B again. “A TO B CANCELLED” is
displayed and the A-B Repeat is disabled.
¥
NOTE:
If you give up entering the point B after entering A
simply press RETURN, and the operation is
cancelled.
Convenient Functions
Disp laying the time information
Press TIME during playback.
Each time this button is pressed, an information box
is displayed on TV screen to indicate the status of
the time displayed on the VFD display.
If “SINGLE ELAPSED” is displayed, the VFD
display on the unit shows the elapsed time for the
track that is being played.
If “SINGLE REMAIN” is displayed, the VFD
display on the unit shows the remaining time for the
track which is being played.
If “TOTAL ELAPSED” is displayed, the VFD
display on the unit shows the elapsed time for the
disc which is being played
If “TOTAL REMAIN” is displayed, the VFD display
on the unit shows the remaining time for the disc
which is being played.
Program Function
Press STOP button if it’s playing.
Press PROGRAM button to select program mode.
Enter track numbers that you want to add to program
list.
For the track numbers which are greater than “9”,
use “+10” button. Press this button once and than
type the two digit track number.
Press PLAY/PAUSE b utton to finish the program
entry.
Screen is cleared and it will start playing the program
list.
¥
NOTE:
• If you attempt to enter a number greater than the
total number of tracks on disc, it clears the
numbers entered and waits for you to enter again.
You can remove the last track of the play list by
pressing the C button.
The program is cancelled when:
- The disc track is opened or closed.
- The power is turned off.