Hitachi CPWX12WN Manual Download Page 61

Page: 61 / 242

SCREEN menu

Item

Description

C.C.

(Closed Caption)

The C.C. is the function that displays a

transcript or dialog of the audio portion of

a video,



les or other presentation or other

relevant sounds. It is required to have NTSC

format video or 480i@60 format component

video source supporting C.C. feature to

utilize this function.

It may not work properly, depending on equipment or signal source.

In this case, please turn off the Closed Caption.

DISPLAY

Select Closed Caption DISPLAY setting from following options using

▲

▼

buttons.

AUTO

OFF

AUTO : Closed Caption automatically displays when the volume

is muted.

ON : Closed Caption is on.

OFF

: Closed Caption is off.

• The caption is not displayed when the OSD menu is active.

• The Closed Caption is the function to display the dialogue,

narration, and / or sound effects of a television program or other

video sources. The Closed Caption availability is depending upon

broadcaster and/or content.

MODE

Select Closed Caption MODE setting from following options using

▲

▼

buttons.

CAPTIONS

TEXT

CAPTIONS : Display Closed Caption.

TEXT : Display Text data, which is for additional information such

as news reports or a TV program guide. The information

covers the entire screen. Not all of the C.C. program has

Text information.

CHANNEL

Select Closed Caption CHANNEL from following options using

▲

▼

buttons.

: Channel 1, primary channel / language

: Channel 2

3: Channel 3

: Channel 4

The channel data may vary, depending on the content. Some

channel might be used for secondary language or empty.

Summary of Contents for CPWX12WN



















































































































































































































































Search results

Summary of Contents for CPWX12WN

Reviews:

Related manuals for CPWX12WN

Brands by name

Popular brands

Hitachi CPWX12WN, Manual

Search results

Summary of Contents for CPWX12WN

Reviews:

Related manuals for CPWX12WN

Brands by name

Popular brands