Hitachi CPWX12WN Manual Download

Page: 76 / 242

NETWORK menu

Item

Description

WIRELESS

INFORMATION

"Selecting this item displays the WIRELESS_INFORMATION dialog

for viewing the wireless LAN settings." Use the

▲

▼

buttons to

switch the page.

The



rst page shows the wireless LAN settings. The second and

subsequent pages display the signal information of wireless LAN

connection devices.

• For details of PASSCODE, refer to the manual for “LiveViewer”.
• Nothing (blank) is shown in the PROJECTOR NAME (

) and

SSID (

) field until you setup those items. Only the first 16

characters of the PROJECTOR NAME.

• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate

“0.0.0.0” in the following condition.

(1) The USB wireless adapter is not inserted into the projector.

(2) DHCP is ON and the projector does not get address from DHCP

server.

• Nothing (blank) is shown in the CH and SPEED



elds if the USB

wireless adapter is not inserted.

• The actual performance and setting will be shown in the CH



eld,

instead of the setting value in the WIRELESS SETUP menu.

• An icon is displayed to the left of the SSID of the device connected

to the projector.

(continued on next page)

Summary of Contents for CPWX12WN



















































































































































































































































Search results

Summary of Contents for CPWX12WN

Reviews:

Related manuals for CPWX12WN

Brands by name

Popular brands

Hitachi CPWX12WN, Manual

Search results

Summary of Contents for CPWX12WN

Reviews:

Related manuals for CPWX12WN

Brands by name

Popular brands