51
CP-X417W (C14-30AWL)
Wiring diagram 11
Preparation of the Wireless unit and the Keypad board
Wiring of the Wireless unit and the Keypad board
(1)
Attach the Wireless unit to the bracket.
(2)
Attach the Keypad board styling the CNNET and the CNWIR.
(3)
Bundle the CNNET and the CNWIR by the ZTP3.
Prevention to injure the finger.
(4)
Bundle the CNNET and the CNWIR by the ZTP4.
Prevention to injure the finger.
<How to wrap the ZTP3 and the ZTP4>
ZTP3
<Position of the ZTP3>
<Position of the ZTP4>
<How to wrap the ZTP3 and the ZTP4>
Style the CNNET and the CNWIR under the Keypad board.
Never make the excessive length at the Network unit side.
Bundle the CNNET and the CNWIR by the ZTP3 and the ZTP4.
CNNET/CNWIR lead
CNNET
/CNWIR lead
CNNET
/CNWIR lead
ZTP3, ZTP4
Attaching point of the ferrite core
Attaching point of the Wireless unit
Wrap the ZTP3 at the attaching
point of the ferrite core.
<Reason>
Prevention to injure the finger.
Wrap the ZTP4 at the attaching
point of the Wireless unit.
<Reason>
Prevention to injure the finger.
Bundle the two kinds cable by ZTP3 and ZTP4.
See the below figure.
ZTP4
Style the CNNET and the CNWIR under the Keypad board.
Attach the Keypad board by screw.
Make sure not to pinch the cable by Keypad board and the
table clamp.
KeyPad board
Wireless board
EH01
EMC6
EMN3
CNKEY
CNNET
CNWIR
ZTP3
ZTP4
Summary of Contents for CP-X417W(C14-30AWL)
