44
CP-X417W (C14-30AWL)
Wiring diagram 4
Style of the power unit assembling
Wiring of the power unit
(1)
Attach the CNDG1 to the two ballast holder bosses.
• Make sure not to overflow the lead from ballast holder slit.
(Otherwise, upper case will pinch the lead.)
• Do not make excessive length at the power unit side.
(2)
Pass the CNBAR through the ballast holder rib and the lead holder.
<OK>
<NG>
Make sure not to overflow the lead from
ballast holder slit.
Otherwise, upper case will pinch the lead.
CNGD1 lead
CNGD1 lead
CNGD1
TSW
CNPW
CNBAR
ZTP2
Point A
Make sure not to make the excessive
length at the point A .
Otherwise, upper case will pinch the lead.
Attach the CNDG1 to the two ballast holder
bosses Otherwise, upper case will pinch the lead.
Pass the CNBAR through the ballast holder rib and the lead holder.
Never make the excessive at the ballast power unit side.
Otherwise, the CNBAR lead will touch to the primary of the power unit.
Area of Importance
Summary of Contents for CP-X417W(C14-30AWL)
