21
1.
Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
Turning on the power
2.
Make sure that the
POWER
indicator is
steady orange (
110
). Then remove the
lens cover.
3.
Press
STANDBY/ON
button on the
projector or the remote control.
The projection lamp will light up and
POWER
indicator will begin blinking in green. When the
power is completely on, the indicator will stop blinking and light in steady
green (
110
).
Power on/off
To display the picture, select an input signal according to the section
Selecting an
input signal
(
24
).
Power on/off
The INITIAL SETTING Menu will be displayed by factory default upon startup.
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET
(
67
) is executed. If you wish to change the settings, refer to the LANGUAGE
(
50
) and ALTITUDE (
60
) menu.
(1) LANGUAGE: Use the ▲/▼/◄/►
buttons to select the desired language
and press the
ENTER
button of the
remote control or the
INPUT
button of
the projector to execute.
(2) ALTITUDE: Use the ▲/▼ buttons to
select NORMAL for altitude below
1600 m (5250 feet), otherwise select
HIGH and press the
ENTER
button of
the remote control or the
INPUT
button
of the projector to execute.
VIDEO
DOC.CAM
ERA
KEYSTO
NE
ASPECT
SEARCH
BLA
NK
MUTE
MY
BUTTON
POSI
TION
ESC
MENU
RE
SET
COMPUT
ER
MY SOUR
CE/
AUTO
MAGNIFY
PAGE
DOWN
ON
OFF
FREEZ
E
UP
ー
＋
VOLUME
1
2
ENTER
STANDBY/ON
button
POWER
indicator
