Hitachi CP-X2530WN User Manual Download

Page: 112 / 118

112

• When the interior portion has become overheated, for safety

purposes, the projector is automatically shut down, and the indicator lamps

may also be turned off. In such a case, disconnect the power cord, and wait at

least 45 minutes. After the projector has sufficiently cooled down, please make

confirmation of the attachment state of the lamp and lamp cover, and then turn

the power on again.

If the projector is used at an altitude of about 1600 m (5250 feet)

or higher, set ALTITUDE of the SERVICE item in the OPTION menu to HIGH

(



Otherwise, set it to NORMAL.

NOTE

Troubleshooting

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking In

Green

for

approx. 3

seconds.

Turned

off

Turned

off

At least 1 Power ON schedule is saved to the

projector.

Please refer to Schedule Settings in the Network

Guide.

Lighting

Orange

Lighting

Red

Lighting

Red

Loading the saved data of CLONING on STANDBY

MODE.

Blinking

Orange

Blinking

Red

Blinking

Red

Loading the saved data of CLONING has failed on

STANDBY MODE.

Please refer to

CLONING (



64 ~ 66

Turned

off

Turned

off

Turned

off

Loading the saved data of CLONING has succeeded

on STANDBY MODE.

Regarding the indicator lamps (continued)

Summary of Contents for CP-X2530WN























































































































Search results

Summary of Contents for CP-X2530WN

Reviews:

Related manuals for CP-X2530WN

Brands by name

Popular brands

Hitachi CP-X2530WN, User Manual

Search results

Summary of Contents for CP-X2530WN

Reviews:

Related manuals for CP-X2530WN

Brands by name

Popular brands