30
Operating
1.
Using the magnify feature
2.
MAGNIFY
ON/OFF
button
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT
SEARCH BLANK
MUTE
MY BUTTON
POSITION
ESC
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
DOWN
ON
OFF
FREEZE
UP
ー
＋
VOLUME
1
2
ENTER
3.
4.
Press the
MAGNIFY ON
button on the remote control.
The picture will be magnifi ed, and the MAGNIFY dialog
will appear on the screen. When the
MAGNIFY
ON
button is pressed for the fi rst time after the
projector is turned on, the picture will be zoomed
by 1.5 times. On the dialog, triangle marks to show
each direction will be displayed.
The display magnifi cation of the projector switches in order with every press
of the
MAGNIFY ON
button.
For computer signals or HDMI
TM
(RGB) signals
1.5 times
2 times
3 times
4 times
1 time
For video signals, s-video signals, component video signals or
HDMI
TM
(Component) signals
1.5 times
2 times
1 time
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor
buttons to shift the magnifying area.
Press the
MAGNIFY OFF
button on the remote control to exit magnifi cation.
● The MAGNIFY dialog will automatically disappear in several seconds with no
operation. The dialog will appear again if the
MAGNIFY ON
button is pressed
when the dialog has automatically disappeared.
● The magnifi cation is automatically disabled when the displaying signal or its
display condition is changed.
● While the magnifi cation is active, the keystone distortion condition may vary.
It will be restored when the magnifi cation is disabled.
● Some horizontal stripes might be visible on the image while magnifi cation is
active.
● This function is not available in the following cases:
- A sync signal in the range not supported is input.
- There is no input signal.
