Hitachi CP-S335W, Service Manual

Page: 34 / 75

33
CP-S335(C9SM)/CP-X340, PJ552 (C9X)/CP-X345, PJ562 (C9XM)
Wiring diagram 4 (C9SM/C9X/C9XM)
Wiring when assembling power source
When assembling power source
(1) Caution: Avoid pinching wires when installing power source.
(CNLC, #3055, #6607, TSW, CNPOW)
(2) Connect lamp leads.
Confirm that the lamp leads are fitted
into the lamp housing rib, and not loose.
Also, be careful not to allow the rise
portion of the lead to protrude from
past the rib.
(Prevents pinching with bottom case
when installing upper case.)
When assembling power source,
do not pinch CNLC, #3055, #6607,
TSW, or CNPOW with the optics
engine.
Do not cross the lamp leads
on the lamp housing rib.
Air flow sensor
#6606
CNRM
#6430
#6800 CNBAR
#6430
#6607
#3055
CNLC
CNPOW
Lamp
lead
CNSH
TSW
A83
Route #6606 over CNRM and through the duct-hook.