Hitachi CP-S335W, Service Manual

Page: 33 / 75

32
CP-S335(C9SM)/CP-X340, PJ552 (C9X)/CP-X345, PJ562 (C9XM)
Wiring diagram 3 (C9SM/C9X/C9XM)
Wiring during bottom case assembly and optical engine assembly
When assembling optical engine
(1) Assemble remote control board, and connect CNRM.
(2) Wire #3055 (axial flow fan).
Route #3055 lead on the
hook of optical engine,
being careful that the
wire does not sag toward
the limit switch.
Secure A83 lead by inserting into bottom case slits.
(Wire A83 before installing optical engine.)
When assembling bottom case
(1) Install and wire A83 (speaker).
(2) Wire CNLC (from limit switch board).
Be careful not to pinch wires when installing optical engine.
A83
CNLC
#3055
Secure CNLC and #3055 by inserting into bottom case slit.
Insert wires into slit nearer to optical engine.
(Wire CNLC before installing optical engine, and be careful of
pinching wires when installing the optics engine.)
Connect CNRM first when
assembling remote control board.
Insert wire into slit.
Stick a tape not to allow
wires to come out from slit.
CNRM
ZTP8
ZTP9
Tape A83 leads after
inserting into slit.
( To prevent coming
out from slit. )
ZTP7
ZTP7
remote control board