Hitachi CP-S210 series, Service Manual

Page: 21 / 66

2
1
CP-S210 (C10S)
6-4 Before Replacing The LCD/Lens Prism
You should not replace separately the parts of the liquid crystal LCD/Lens prism because it works properly only
when used together. Therefore, regarding these parts, you can either replace part, LCD/Lens prism assembly, or
send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the malfunctioning part,
recondition the device and send it back to you.
6-5 The Remote Control
CAUTION
Always handle the batteries with care and use them only as directed. Improper use may
result in battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding
environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with
used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the
remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
Putting Batteries
1. Remove the battery cover.
Slide back and remove the cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus and minus terminals.
(as indicated in the remote control.)
3. Close the battery cover.
Replace the cover in the direction of the arrow and snap it back into place.
DISTRIBUTOR HITACHI
G Panel
Do not disassemble the unit
because replacement of separate
parts is not possible.
Return
Replacement of G Panel Reconditioning