MegaRAID
WebBIOS
2-3
Hitachi Compute Rack 210H/220H BIOS Guide
Disk array utility for the system
The system equipment can set a disk array using the utility “MegaRAID
WebBIOS”.
Under normal operation, you do not need to change the settings.
Setting is required only if you need to change the system configuration, for
example, when you have changed disks.
Operate MegaRAID WebBIOS in accordance with descriptions in this manual.
Otherwise, it may not work properly. Do not execute the operation other than
described in this manual.
Connect a mouse to the system unit before starting MegaRAID
WebBIOS.
Type of RAID controllers
Two types of RAID controller are installed to system units. Those Two types differ
in whether the controller is with or without a cache backup module.
In the MegaRAID WebBIOS menus, the controller types are displayed below:
RAID controller with cache backup module:
LSI MegaRAID SAS 9266-8i
RAID controller without cache backup module:
LSI MegaRAID SAS 9267-8i
Note that in the following description, some setup items and setup steps may
differ depending on the type of the RAID controller.
