Hitachi CMU LPQ520 User Manual Download Page 129

Page: 129 / 153

6 MAINTENANCE

6-28

⑥

broadcast address

Broadcast address used.

⑦

output request count

The number of send requests that were accepted for message transmission.

⑧

output count (success)

The number of message transmissions that were done successfully.

⑨

output discard error count

The number of message transmissions that failed due to memory shortage.

⑩

output error count

The number of message transmission failure reports that were made by hardware
following a send request issued by the driver to the hardware.

⑪

deliver count

The number of received-message deliveries that were made to users.

⑫

input count

The number of message reception reports that were made by hardware.

⑬

input discard error count

The number of message receptions that failed due to memory shortage.

⑭

input error count

The number of message reception failure reports that were made by hardware following a
“get message” request issued by the driver to the hardware.

Summary of Contents for CMU LPQ520


























































































































































Search results

Summary of Contents for CMU LPQ520

Reviews:

Related manuals for CMU LPQ520

Brands by name

Popular brands

Hitachi CMU LPQ520, User Manual

Search results

Summary of Contents for CMU LPQ520

Reviews:

Related manuals for CMU LPQ520

Brands by name

Popular brands