21
Italiano
PRECAUZIONI PER LA TRONCATRICE
1.
Non usara mai la troncatrice con il coperchio di
sicurezza in posizione aperta.
2.
Assicurarsi che il coperchio di sicurezza si muova
liberamente.
3.
Tenere sempre la lama della sega affilata.
4.
Non utilizzare l'utensile con la lama della sega,
rivolta verso l'alto o a lato.
5.
Assicurarsi che la superficie da lavorare sia libera
da materiali estranei come chiodi.
6.
Quando si transporta l'utensile, non tenerlo per
il supporto, bensi per la maniglia.
ACCESSORI STANDARD
(1) Lama della sega a punta di carburo
(ø305
×
50P) (montata sull'untensile) .................. 1
(2) Chiave ......................................................................... 1
(3) Barre rotonde ............................................................ 1
Gli accessori standard possono essere cambiamento
senza preavviso.
ACCESSORI DISPONIBILI A RICHIESTA
(Venduti separatamente)
(1)
Lama della sega a punta di carburo (ø305
×
60P)
Gli accessori dispónibili a richiesta possono essere
cambiamento senza preavviso.
APPLICAZIONE
䡬
Taglio di vari tipi di metallo vari, tubi quadrati in
acciaio, acciaio profilato e barre rotonde.
PRIMA DI INIZIARE LE OPERAZIONI
1.
Alimentazione
Assicurarsi che la rete di alimentazione che si
vuole usare sia compatibile con le caratteristiche
relative all’alimentazione di corrente specificate
nella piastrina dell’apparecchio.
2.
Interruttore di corrente
Mettere l’interruttore in posizione SPENTO. Se la
spina è infilata in una presa mentre l’interruttore
di azionamento è acceso, l’utensile elettrico si
mette immediatamente in moto, facilitando il
verificarsi di incidenti gravi.
3.
Prolunga del cavo
Quando l’ambiente di lavoro è lontano da una
presa di corrente, usare una prolunga del cavo
di sufficiente spessore e di prestazione adeguata.
La prolunga deve essere più corta possibile.
4.
Le parti mobili sono fissate con una catena durante
il trasporto. Premere leggermente l’impugnatura
per sfilare la catena dal suo gancio.
REGOLAZIONE DELLA MACCHINA PRIMA
DELL'USO
ATTENZIONE
Eseguire tutte le regolazioni necessarie prima di inserire
la spina nella presa di corrente.
1. Controllare che la copertura di sicurezza funzioni
bene.
(1) Assicurarsi che la copertura di sicurezza sia
spostata lentamente quando la maniglia si trova
nella posizione in basso.
(2) Poi controllare che lá copertura di sicurezza ritorni
alla posizione originale quando si solleva
l'impugnatura.
2. Assicurarsi che il blocco del mandrino utilizzato per
installare e rimuovere la lama della sega sia rimosso.
3. Assicurarsi che la lama della sega sia fissata
fermamente in posizione.
4. Controllare la vibrazione della superficie girando la
lama sella sega, Se c'é molta deformazione
superficie, la durata di servizio della lama sarà
accorciata e la precisione del taglio sarà deteriorata.
7.
Iniziare a tagliare solo dopo che il motore ha
raggiunto la velocità massima.
8.
Se si notano delle anormalità, disattivare
immediatamente l'interruttore (OFF).
9.
Disattivare l'alimentazione e aspettare che la lama
della sega sia ferma, prima di intervenire
sull'utensile o regolarlo.
10.
Utilizzare soltanto le lame della sega o punta di
carburo Hitachi per tagliare il metallo puro. Non
utilizzare le lame per seghe per legno, seghe di
metallo oppure la lama di taglio.
*Accertatevi di aver controllato bene la piastrina perché essa varia da zona a zona.
CARATTERISTICHE
Tubi in acciaio
ø115mm
Capacità massima di taglio
Tubi quadrati in acciaio
100mm
×
100mm
Altezza
×
Larghezza
Acciaio profilato
75mm
×
125mm
Barre rotonde
ø32mm
Angolo di taglio angolare
0° – 45°
Potenza assorbita
1450W*
Velocità senza carico
1350/min
Peso
19kg
04Ita_CD12F_WE
1/6/09, 16:24
21