6
Facility names and functions (Rear)
CU-HD1300F-S3
24
25
26
17
15
19
21
23
28
27
20
17
18
12
13
15
D.RET
input connectors
(BNC)
Inputs for SDI return video
RET IN
RET.B IN
Purpose
For viewfinder
For floor monitor
Inputs
4
2
Output
VF or RET OUT x1
(SK-HD1300-S3)
HD-SDI2x1
(CA-HF1300-S3)
Output
selection
RET-1/2 switch
（
CA-HF1300-S3
）
Selected by CCU
menu.
(CU-HD1300F-S3)
17 REMOTE 1,2,3
connectors
Connection for the optional remote control unit
RU-1500 or setup control unit SU-1000.
(refer to p30)
18
Genlock connectors
(BNC)
Input tri-level sync signal or black burst signal
for genlock operation.
19 PROMPT
connectors
(BNC)
Input analog video signal for the prompter. The
signal is sent to PROMPT out connector on
CA-HF1300-S3.
20
Fiber connector
Connect Fiber cable.
21 AC IN
connector
Input for AC power supply.
AC input range is 100V to 240V, 47 to 63Hz,
with auto-sensing.
23 MIC OUT
connector
(XLR 3pin)
Outputs MIC1 audio signals from a camera.
(refer to p30)
24 MIC REMOTE
connector
This connector is used to select the MIC
amplifier gains. (refer to p32)
25 COMMUNICATION
connector
Intercom and tally signals are input from
external system. (refer to p31)
26 WFM CONTROL
connector
This connector is used to select the display
mode of the waveform monitor. (refer to p32)
27 TALLY OUT
connector
Contact outputs for tally signals. (refer to p30)
28 FG
terminal
Frame ground terminal.
When using return video, please input correct
format signal, which is selected on the
ASSIGNMENT menu (refer to p19).
