15
Function menu
3.1.
ASSIGNMENT menu
4.
MIC GAIN menu
5.
SYSTEM TIMING menu
6.
SYSTEM TIMING menu
Item
Setting
Factory
setting
Description
RET.1
1080p,
1080i/PsF/P,
720p,
SD SDI 16:9,
SD SDI 4:3
1080i/PsF/P
Assigns the TV format to RET.1.
RET.2
Assigns the TV format to RET.2.
RET.3
Assigns the TV format to RET.3.
RET.4
Assigns the TV format to RET.4.
RET.B1
Assigns the TV format to RET.B1.
RET.B2
Assigns the TV format to RET.B2.
Item
Setting
Factory setting
Description
MIC1 GAIN
-10dB, -20dB,
-30dB, -40dB,
-50dB, -60dB,
-70dB
-60dB
Sets the sensitivity of the MIC1 line.
MIC2 GAIN
-60dB
Sets the sensitivity of the MIC2 line.
MIC REMOTE
STANDARD,
TYPE S
STANDARD
Sets assignments for MIC REMOTE
connector.
For more detail of the assignments, see
page 27.
Item
Setting
Factory
setting
Description
INCOM SET
4WIRE
2W RTS
2W CLR COM
4WIRE
Sets the INTERCOM system connected to CCU
COMMUNICATION connector. For the detail of this pin
diagrams, see page 31.
TALLY SET
CONTACT
VOLTAGE
CONTACT
Sets the power supply method for TALLY.
CONTACT: when not supplying external power.
VOLTAGE: when supplying external power.
Item
Setting
Factory
setting
Description
GL H PHASE
-128(-2048) to +127(2047) 108(1728)
Adjusts whole system phase against genlock
signal.
HD H PHASE
-128(-512) to +127(511)
0
Adjusts HD-SDI output phase locally.
SD H PHASE
-128(-256) to +127(255)
0
Adjusts SD-SDI output phase locally.
■ＡＳＳＩＧＮＭＥＮＴ
ＳＥＬＥＣＴ ＴＹＰＥ
ＲＥＴ．１ ：１０８０ｉ／ＰｓＦ／Ｐ
ＲＥＴ．２ ：１０８０ｉ／ＰｓＦ／Ｐ
ＲＥＴ．３ ：１０８０ｉ／ＰｓＦ／Ｐ
ＲＥＴ．４ ：１０８０ｉ／ＰｓＦ／Ｐ
ＲＥＴ．Ｂ１ ：１０８０ｉ／ＰｓＦ／Ｐ
ＲＥＴ．Ｂ２ ：１０８０ｉ／ＰｓＦ／Ｐ
MIC GAIN of camera can be controlled remotely when camera is connected.
When camera is not connected or an external controller is connected to MIC REMOTE connector,
“*” mark is displayed on the left of MIC1/2 and MIC GAIN cannot be changed.
■ＭＩＣ ＧＡＩＮ
ＭＩＣ１ ：－６０ｄＢ
ＭＩＣ２ ：－６０ｄＢ
ＭＩＣ ＲＥＭＯＴＥ ：ＳＴＡＮＤＡＲＤ
■ＳＹＳＴＥＭ ＴＩＭＩＮＧ
ＧＬ Ｈ ＰＨＡＳＥ ： １０８（ １７２８）
ＨＤ Ｈ ＰＨＡＳＥ ： ０（ ０）
ＳＤ Ｈ ＰＨＡＳＥ ： ０（ ０）
■ＳＹＳＴＥＭ ＴＩＭＩＮＧ
ＩＮＣＯＭ ＳＥＴ ：４ＷＩＲＥ
ＴＡＬＬＹ ＳＥＴ ：ＣＯＮＴＡＣＴ
