Hitachi BD-100GV, Instruction Manual

Page: 11 / 68

11
●
The symbol M is for checking whether you install the washing machine correctly.
Removing the transport bolts
M
Remove the four transport bolts using the spanner (P. 3; Packed-In Accessories). After that, insert the
cover caps at these positions.
M
The transport bolts must always be removed before using the washing machine for the fi rst time and
must be retained for any subsequent transport (e.g. when moving).
20-25 mm.
Do not remove these hose holders.
Remove the
transport bolt out
20-25 mm.
Then use your hand
to pull straight out.
Insert the
cover caps
* Wear gloves before removing the transport bolts to prevent injury.
Hose and cable length
●
Connection on the left side
• Optimum Water Pressure :
(0.03-0.8 MPa)
• Use cold water from the tap
Water Supply Hose
max 100 cm min 60 cm
Water Drain Hose (Approx. 82 cm)
Power Cord
Power Supply (220-240V 50Hz)
●
Connection on the right side
Power Supply (220-240V 50Hz)
Power Cord
Water Supply Hose
Water Drain Hose (Approx. 142 cm)
min 60 cm
max 100 cm