64
Troubleshooting (Continue)
Problem
Possible Cause
Solution
Unusual noise or
vibration
●
The transport bolts may not have been
removed.
●
The washing machine may be installed
on a sloping or unstable surface.
●
There may be foreign objects inside
the drum.
●
Remove the transport bolts
before using.
●
Install the washing machine on a
horizontal, stable surface.
●
Remove foreign objects such as
coins, pins, etc. from the drum.
Noise during drain
cycle
●
This is normal. There may be noise
when the drain pump is on.
●
This is not a malfunction.
There’s the sound
of water when the
drum is rotated
manually.
●
The sound of water
fl
owing when
the drum is turned by hand when the
machine is not running. This is the
sound of the water in the balance ring,
which is used to balanced.
●
This is not a malfunction.
Tapping noise
comes out at spin
start.
●
This is normal. Tapping sound is
generated when laundry touches to the
laundry protection bulge on the laundry
inlet.
●
This is not a malfunction.
Dispenser is wet.
●
In some environmental or usage
conditions, Dispenser may get wet due
to condensation.
●
This is not a malfunction.
Water remains in
washing machine
before initial use.
●
There may be drops of water or
condensation in the washing machine
due to the factory inspection prior to
shipment.
●
This is not a malfunction.
Summary of Contents for BD-100GV
Page 67: ...67 Memo ...
Page 68: ...3WPL147262 ...
