DAB
F4
DAB
F5
This system is supplied with an external DAB/FM rod antenna, to obtain the best performance, you should
ensure the antenna is installed properly, have it fully extended and locate its position as well as the
direction for the best reception. For ideal DAB reception, always maintain the antenna in a vertical position.
When the system is powered up for the first time, it will be in standby mode. Press the Standby button once
to switch the unit on, it will automatically enter into the DAB mode and perform services full scan function.
During the scan, the display will show a slide bar that indicates the progress of the scan. After the scan has
finished, the number of services found will be displayed and then the first alphanumerically found station
will be automatically selected. (F. 4) (F. 5)
Unlike normal radio, the separate signals from a number of DAB stations are grouped together and
transmitted in a single frequency; these groups are referred to as multiplexes or ensembles. Every time
one of these groups has been found, the name of that group will be displayed.
LISTENING TO YOUR RADIO
LISTENING TO YOUR RADIO
Hints for better reception
DAB Mode
SETTING THE CLOCK
SETTING THE CLOCK
When the system is connected to the power and switched on for the first time, it will be in standby. Press
the Standby button once to switch on the unit, it will automatically enter into the DAB mode and perform
DAB services full scan function, after the scan has finished, the first alphanumerically found station will be
automatically selected. The clock will then be synchronized to the current local time.
You can manually set the clock in standby mode. Since the clock will be automatically synchronized to the
DAB clock, so you should only set the clock manually if you cannot receive a DAB signal.
W
hen t he
is first powered up, it will be in standby mode, the display will show “00:00:00” and
unit
flash. Press and hold the Menu/Setup button until the hour digits flash in the display, press the
◀ ◀
or
▶▶
button to set to the correct hour, and then press the
Menu/Setup
button again to confirm. Then the
minute digits will flash, press the
◀
▶ ▶
Press the
Menu/Setup
◀
or
button to set to the correct minute.
button again to confirm, the manual clock setting
i
s now completed. (F. 1) (F. 2) (F. 3)
F2
F3
F1
Manual clock setting
Synchronise the clock to the DAB local time
1. Switch on the unit and select DAB mode, ensure that a DAB station is received.
2. The clock will be automatically synchronized to the DAB local time. To check the clock, repeatedly
press the Info/Display button until the time and date appear in the display.
8
Note: you will have 5 seconds to make adjustments.
