After Sales Support
Telephone:
1300 886 649
Email:
22
Getting Started
Powering the TV
• Plug the power cord into a suitable power outlet, then turn on the power
at the outlet.
• Press the
POWER button, on the right side of the back panel (or on the
remote control, aiming it at the sensor at the bottom-right of the TV); the
indicator light will glow blue. Press it again to power off (standby mode);
the indicator light will illuminate red.
Installation Guide
When you switch on the TV for the first time, the First Time Setup menu will be
displayed on the screen.
Setup navigation
• Press the
/ / / buttons to select different sub-menus.
• Press the
OK button to confirm settings.
Step One:
Language
• Use the / buttons to select your On-Screen Display (OSD) language
and then press the
OK button to go to the next step.
Step Two:
Data Collection and Firmware Updates Notice
1. Select
Accept and press the OK button to accept the EULA and go to
the next step.
2. Select
View Additional Details and then press the OK button to read a
detailed EULA.
Press the
/ / / buttons to make your selection then press the
OK
button to confirm and go to the next step.
NOTE: If Decline All is selected, no user information will be collected but
you may still receive software update notifications and you will still be
able to use smart applications.
IMPORTANT!
Make sure all relevant equipment is properly connected (see previous pages)
before connecting the unit to a wall socket and turning on the power.
