background image

On-Scr

een Display

Locks

Canadian Ratings (Frn)

Use

CANADIAN RATINGS (FRN)

to block Canadian

French programs according to various program ratings
that you feel might be inappropriate in its content.

1.

Use the 

CURSOR PAD

,

or

CHANNEL

 UP/

DOWN buttons

to select the 

CANADIAN RATINGS

(FRN)

category that you want to block.

2.

Press 

SELECT

to block the 

CANADIAN RATINGS

(FRN)

that you have selected. Once rating is

selected, for example 

8 ANS+

, all movies and

television programs rated 

8 ANS+

and higher will

be blocked automatically.

3.

Press 

EXIT

to quit the menu or select 

CANADIAN

RATINGS (FRN)

to return to the previous menu.

Canadian Ratings French Chart

G

General - Programming intended for audiences of all ages. Contains no violence, or the 
violence content is minimal or is depicted appropriately with humor or caricature or in an 
unrealistic manner.

8 ans +

8 + General - Not recommended for young children - Programming intended for a broad 
audience but contains light or occasional violence that could disturb young children. 
Viewing with an adult is therefore recommended for young children (under the age of 8) 
who cannot differentiate between real and imaginary portrayals.

13 ans +

Programming may not be suitable for children under the age of 13 - Contains either a few 
violent scenes or one or more sufficiently violent scenes to affect them. Viewing with an 
adult is therefore strongly recommended for children under 13.

16 ans +

Programming is not suitable for children under the age of 16 - Contains frequent scenes of 
violence or intense violence.

18 ans +

Programming restricted to adults - Contains constant violence or scenes of extreme 
violence.

Canadian Ratings(Frn)

Locks

    Move

SEL

  Return

 Status 
 G 

 

  8 ans + 

 

  13 ans +   
  16 ans +   
  18 ans +   

Alternate Ratings U.S.

Canadian Ratings(Frn)

Canadian Ratings(Eng)

TV Ratings

Movie Ratings

Engage Lock

Change Access Code

Locks

    Move

SEL

  Select

OR

44

Summary of Contents for 50C20A

















































































Reviews: