background image

66

License Agreements

End User License Agreements for Operating System Software

SOFTWARE LICENSE INFORMATION

Your

HITACHI 

brand digital television (the “DTV”) uses certain open source operating system 

software (the “OS Software”) distributed pursuant to GNU GENERAL PUBLIC LICENSE Version 
2 and GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, each as defined and published 
by the Free Software Foundation, Inc.   

The OS Software modules incorporated into the DTV are listed in the table below opposite the 
applicable GNU software license.  Copies of such GNU software licenses are provided in the 
pages that follow. 

Software Module 

Applicable GNU Software License 

Linux Kernal 
busybox
dhcpdcd 
ifupdow 
net-tool
iptables
+5

GNU GENERAL PUBLIC LICENSE 

Version 2 

glibc
libposixtime

GNU LESSER GENERAL PUBLIC LICENSE 

Version 2.1 

For purposes of incorporating the OS Software into the DTV, Hitachi made certain modifications 
to the source code of the OS Software (collectively, the “Source Code Modifications”) in 2006.  
The Source Code Modifications also are distributed pursuant to the applicable GNU software 
licenses identified above. 

THE OS SOFTWARE AND THE SOURCE CODE MODIFICATIONS ARE PROVIDED “AS IS” 
AND THE LICENSEE DISCLAIMS ANY AND ALL WARRANTIES OF ANY KIND, INCLUDING 
THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. See the GNU General Public License for additional terms and conditions. 

If you would like to learn more about the Free Software Foundation or the GNU software project, 
please visit http://www.fsf.org.   If you would like to request a copy of the Source Code 
Modifications from 

HITACHI

, please send an email to the following address: 

[email protected] 

Summary of Contents for 50C20A

















































































Reviews: