- 30 -
Copy Facility
Source selection for
VCR
recording.
Select
Feature
menu.
Select
Av-2 Out
by pressing
_
/
`
button.
Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
Unplug the aerial cable from the aerial
socket of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the
Install
menu and select
search
.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
Replace the aerial cable in the aerial
socket of your video recorder once you have
stored the test signal.
Camera And Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV
(AV-4) input at the rear side of the TV.
Connect your equipment to the TV via
VIDEO
(yellow),
AUDIO R
(red) and
AUDIO L
(white)
inputs. You must connect the jacks to the in-
put using the same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input at the rear side of the TV.
Connect your equipment to the TV via S-VHS
input and audio inputs of AV inputs by using
S-VHS cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special Scart
socket for decoder.
Connect a Scart cable to the Scart socket of
