- 23 -
5 mins but try not to leave static images on
the screen for long periods of time.
Install menu
By pressing
_
/
`
button, select the fourth
icon. Install menu appears on the screen.
Program
By pressing
a
/
b
button, select
Program.
Press
_
/
`
button to select the program
number. You can also enter a number via
digit buttons on the remote control. There
are 100 program storage between 0 and 99.
Band
Band
can be selected either C or S by
pressing
_
/
`
button.
Channel
Channel
can be changed by
_
/
`
button or
Digit Buttons.
Colour System
By pressing
a
/
b
button, select
Colour
System.
Press
_
/
`
button to change the
colour system to
PAL, PAL60, SECAM
or
AUTO
.
Note:
In AV mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
a
/
b
button, select
Sound
System.
Press
_
/
`
button to change the
sound system to
BG, DK, I
or
L/L
.
Fine Tune
By pressing
a
/
b
button, select
Fine Tune.
Press
_
/
`
button to adjust the tuning.
Search
By pressing
a
/
b
button, select
Search.
Press
_
/
`
button to start program search-
ing. The searching will stop when a signal is
found. You can also enter a frequency value
directly by pressing the digit buttons.
VCR (Video Cassette Recorder)
This item can be seen in
all modes except
Av-3 and PC.
If you want to watch a
VCR
source from one
of these modes, then it will be better to set
VCR
mode on. For this, while the cursor is
on this item press the
_
/
`
buttons to set it
On
.
If you want to watch a
DVD
, then you must
set this item
Off
.
Store Program
By pressing
a
/
b
button, select
Store Pro-
gram.
Press
_
/
`
or
OK
button to store the
adjustments. Program Stored will be dis-
played on the screen.
Program menu
By pressing
_
/
`
button, select the fifth icon.
Program menu appears on the screen.
By moving the cursor in four directions you
can reach 20 programmes in the same
page. You can scroll the pages up or down
by pressing the navigation buttons to see all
