background image

- 18 -

press  the  “OK”  button  to  display  TV  Setup

menu  screen.

Detailed information about Sound, Picture

and  Feature  menus  are  in  AnalogueTV

Menu System section on page 18.

Common Interface

• Press the “

” button to display the Main

Menu and use the   or   button to highlight

the 

“Common Interface”

 line and press

 

the

“OK” button.

It  is  required  to  subscribe  to  a  pay  channel

company  to  view  the  pay  channels  of  the

Digital Terrestrial broadcasting.
Obtain  the  Conditional  Access  Module

(CAM) and the Viewing card by subscribing

to a pay channel company, then insert those

to  the  Television  using  the  following  proce-

dure.

1. Switch off the TV and unplug from the

mains.
2. Insert the CAM, then Viewing Card to the

slot that is located in the terminal cover at

the  left-hand  side  of  the  TV  (from  front

view).

• The CAM should be correctly inserted, it is

impossible  to  insert  fully  if  reversed.  The

CAM or the TV terminal may be damaged if

the CAM is forcefully inserted.

3.  Connect  the  TV  to  the  mains  supply,

switch on and then wait for few moments

until the card is activated.

• Some CAMs may require the following set

up. Please set the CAM by entering the IDTV

menu, Common Interface then pressing the

“SELECT” button. (CAM set up menu is not

displayed when it is not required.)
• To see the viewing contract information:
Enter IDTV; press the “

” button, then high-

light 

Common Interface

 and press the “OK”

button.
• When no module is inserted, “

No Common

Interface  module detected

” message ap-

pears on the screen.

• Refer to the module instruction manual for

details of the settings.

Analogue TV Menu System

Your  TV  has  been  designed  with  a  menu

system  to  provide  easy  manipulation  of  a

multifunction  system.
Press  the 

 

button  to  enter  the  menu.

Press 

_

 / 

`

 button to select a menu title and

then 

a

 / 

b

 button to select a menu item and

_

 / 

`

 or “

OK

” button to enter the menu item.

• Press the

 

 button to exit the menu.

• Press the

 

 button to return to the previous

menu.

Summary of Contents for 42PD6700U








































Reviews: