Hitachi 13VR10B Owner'S Manual Download Page 8

Page: 8 / 59

PRECAUTIONS

PRECAUTIONS

LOCATION

For safe operation and satisfactory performance of your unit, keep the
following in mind when selecting a place for its installation:

Shield it from direct sunlight and keep it away from sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat dissipation. Do not

block the ventilation holes at the top and bottom of the VCR. Do not place the
unit on a carpet because this will block the ventilation holes.

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the VCR near strong magnetic fields.

Do not move the unit from a cold to a hot place or vice versa.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from AC wall outlet.

Grasp it by the plug.

If, by accident, water is spilled on your VCR, unplug the power cord

immediately and take the unit to an Authorized Service Center for servicing.

Do not put your fingers or objects into the TV/VCR cassette holder.

Do not place anything directly on top of the VCR.

Summary of Contents for 13VR10B




























































Search results

Summary of Contents for 13VR10B

Reviews:

Related manuals for 13VR10B

Brands by name

Popular brands

Hitachi 13VR10B, Owner'S Manual

Search results

Summary of Contents for 13VR10B

Reviews:

Related manuals for 13VR10B

Brands by name

Popular brands