PRESET FOR USE
22
follows:
• First Sunday of April: from 2:00AM to 3:00AM (summer time):
When
programmed recording starts between 2:00AM - 2:59AM on this day, the
TV/VCR will start recording at 3:00AM.
• Last Sunday of October: From 1:00AM to 2:00AM
When programmed
recording ends between 1:00AM - 1:59AM on this day, the TV/VCR will stop
at 2:00AM.
Make sure...
• Press POWER button to turn on the TV/VCR.
• You must use the remote control for the following steps.
1 Select "SETTING CLOCK"
Press MENU button repeatedly to point to "SETTING CLOCK".
Then, press SELECT button.
2 Set "D.S.T." (Daylight Saving Time) to [ON]
Press MENU button repeatedly to point to "D.S.T."
3 Set "D.S.T." (Daylight Saving Time) to [ON]
Press CH
or
button repeatedly until [ON] appears.
4 Exit the Daylight-Saving Time mode
Press MENU button repeatedly until the TV/VCR return to the TV mode.
TO CANCEL THE DAYLIGHT-SAVING TIME
Repeat steps [1] to [3]. Then, press CH
or
button until [OFF] appears
and press MENU button to return to TV mode.
SETTING THE CLOCK (AUTO/MANUAL)
Set the clock accurately for proper automatic timer recording. If the Public
Broadcasting Station (PBS) is available in your area, follow "AUTO CLOCK
SETTING". If it is not, follow "MANUAL CLOCK SETTING".
AUTO CLOCK SETTING
You can have the TV/VCR set the clock automatically by using the Public
Broadcasting Station (PBS) channel in your area. Once you have set the
clock by using the following procedure, the TV/VCR will automatically monitor
the correct time and date being broadcast by the PBS station in your area,
using a new service called Extended Data Service (XDS).
Make sure...
• Press POWER button to turn on the TV/VCR to set the Auto Clock to ON.
• Confirm that the antenna connections are correct.
