1-4
StarBoard FX-E90W
Introduction
English
1.3 Role of Each Part
1.3.1 StarBoard
(1) Board
Frame and board part of the StarBoard.
(2) Digitiser Storage Area
Receives information regarding characters or
images drawn with the pen or the user's
finger, and transmits this data to the PC.
(3) Function Area (Left and Right)
Shortcut buttons for functions that are
frequently used in applications are located
here. (Refer to the next page for details.)
(4) Input Area
Characters or images drawn in this area are
imported into the PC. When using the
StarBoard in Projection Mode, make sure that
the image projected from the projector is kept
within this area.
(5) USB Cable
Used to connect the StarBoard with the PC.
(6) Reflective Frame
Reflects light. Used to capture pen or finger
operations.
(7)
Wall Fitting Attachment
Used to fix the lower board on the wall.
Use 4-6mm diameter screws.
(8)
Wall Fixing Hole
Board has four holes to fix the four corners on
the wall.
Use 3mm diameter screws.
(9)
Projection area mark
In case of using projection mode, image should
be projected within this area (dotted line).
※
Max approx 90 inch
（
1939mm(W)×1212mm(H)
）
(10)
Status LED
The connection status is displayed by the color
and lighting status of the LED.
Lit green: Normal
Flashing orange: Recognizing StarBoard
Lit orange: Error has occurred
(3)
(4)
(5)
(6)
(7)
(8)
(1)
(2)
(8)
(8)
(8)
(3)
(6)
(6)
(9)
(9)
(9)
(9)
(10)
