Hitachi Koki TBC-290 Handling Instructions Manual Download Page 72

FR

IT

GB

DE

NL

ES

PT

GR

EC DECLARATION OF CONFORMITY

(Applies to Europe only)

We declare under our sole responsibility that this product is in conformity with 
Directive 2006/42/EC, 2004/108/EC and 2000/14/EC.
The following standards have been taken into consideration.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Annex V (2000/14/EC): For information relating to noise emissions, see the 
chapter specifications.
The European Standards Manager at Hitachi Koki Europe Ltd. is authorized to 
compile the technical file.

This declaration is applicable to the product affixed CE marking.

ERKLÄRUNG ZUR KONFORMITÄT MIT CE-REGELN

(Gilt nur für Europa)

Wir erklären eigenverantwortlich, dass dieses Produkt den Bestimmungen 
der Richtlinien 2006/42/EG, 2004/108/EG und 2000/14/EG des Europäischen 
Rates entspricht. Die nachfolgenden Standards wurden in Betracht gezogen.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Anhang V (2000/14/EG): Informationen zur Geräuschentwicklung finden Sie 
im Kapitel Spezifizierungen. Der Manager für europäische Standards bei der 
Hitachi Koki Europe Ltd. ist zum Verfassen der technischen Datei befugt.

Diese Erklärung gilt für Produkte, die die CE-Markierung tragen.

DECLARATION DE CONFORMITE CE

(Concerne l’Europe uniquement)

Nous déclarons sur la foi de notre seule responsabilité que ce produit est 
conforme aux dispositions des Directives du Conseil de l'Union européenne 
2006/42/EC, 2004/108/EC et 2000/14/EC. Les nonnes suivantes ont été prises 
en considération.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Annexe V (2000/14/EC): Pour les informations relatives aux émissions de 
bruits, reportez-vous au chapitre Caractéristiques.
Le responsable des normes européennes d’Hitachi Koki Europe Ltd.
est autorisé à compiler les données techniques.

Cette déclaration s’applique aux produits désignés CE.

DICHIARAZIONE DI CONFORMITÀ CE

(Si applica solo all’Europa)

Dichiariamo sotto la nostra esclusiva responsabilità che questo prodotto è 
conforme alle Direttive del Consiglio 2006/42/CE,
2004/108/CE e 2000/14/CE. Sono stati presi in considerazione i seguenti 
standard.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Allegato V (2000/14/CE): Per informazioni riguardo alle emissioni di rumore, 
consultare le specifiche del capitolo. Il Responsabile delle Norme Europee di 
Hitachi Koki Ltd. è autorizzato a compilare la scheda tecnica.

Questa dichiarazione è applicabile ai prodotti cui sono applicati imarchi CE.

ECVERKLARING VAN  CONFORMITEIT

(Geldt alleen voor Europa)

Wij verklaren onder eigen verantwoordelijkheid dat dit product voldoet aan de 
richtlijn 2006/42/EC, 2004/108/EC en 2000/14/EC.
De volgende standaards zijn toegepast.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Aanvulling V (2000/14/EC): Voor informatie over de lawaai-emissie wordt u 
verwezen naar het hoofdstuk met de specificaties.
De manager voor Europese normen van Hitachi Koki Europe Ltd.
heeft de bevoegdheid tot het samenstellen van het technische bestand.

Deze verklaring is van toepassing op produkten voorzien van de CEmarkeringen

DECLARACIÓN DE CONFORMIDAD DE LA CE

(De aplicación sólo en Europa)

Declaramos bajo nuestra exclusiva responsabilidad que este producto es 
conforme con las Directivas 2006/42/CE, 2004/108/ CE y 2000/14/CE. Se han 
tenido en consideración las siguientes normas.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Anexo V (2000/14/CE): Para más información sobre la emisión de ruidos, 
consulte la sección de especificaciones.
El Jefe de Normas Europeas de Hitachi Koki Europe Ltd. está autorizado para 
recopilar archivos técnicos.

Esta declaración se aplica a los productos con marcas de la CE.

DECLARAÇÃO DE CONFORMIDADE CE

(Aplica-se apenas à Europa)

Declaramos para os devidos efeitos que este produto cumpre os requisitos 
das directivas comunitárias 2006/42/CE, 2004/108/CE e 2000/14/CE. As 
seguintes normas harmonizadas foram aplicadas.
EN ISO 12100, EN ISO 11806-1, CISPR 12
Anexo V (2000/14/CE): Para obter mais informações relacionadas com 
emissões de ruído, consulte as especifi cações do capítulo.
O Gestor de Normas Europeias da Hitachi Koki Europe Ltd. está autorizado a 
compilar o ficheiro técnico.

Esta declaração se aplica aos produtos designados CE.

ΕΚ ΔΗΛΩΣΗ ΕΝΑΡΜ ΝΙΣΜ Υ

+ # 4  &-

& v

 #!  !v

)L__SBeLBn8L__eBN_MBn8L___BNeB 8

' ! #6

EN ISO 12100, EN ISO 11806-1, CISPR 12

(  @+L___BNeBn8-:D #

   ##

q !v >QwFIxQ8]HQnP^]jy

iwk"#

7! Tn

28. 2. 2014

F. Tashimo
Vice-President & Director

Representative office in Europe

Hitachi Power Tools Europe GmbH

Siemensring 34, 47877 Willich 1, F. R. Germany 

Technical file at:

Hitachi Koki Europe Ltd.

Clonshaugh Business & Technology Park, Dublin 17, lreland 

Head office in Japan

Hitachi Koki Co., Ltd.

Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, 
Tokyo, Japan

402

Code No. E99205559
Printed in Japan           

Summary of Contents for TBC-290









































































Reviews: