Hisun 450ATV-2, Maintenance Manual

Page: 94 / 115

94
1. Mount Water system onto the Frame with buffer cushion
(4pcs), Collar Sheath (4pcs), ф6 Cushion (4pcs) and
Hexagon Flange Bolt M6*20 (4pcs).
2. Use Hoops (4pcs) and Rubber Pipes (2pcs) to connect
Water Cooling System with Engine.
3 、 Mount Fluid Tank onto the Frame and connect
Communicating Pipe with Overflow Pipe using M6 Bolts.
4、。Fill in 5:5 Cooling Fluid.
5、Start engine, inspect fluid level, fulfill Fluid Tank
and close the cap.
4.7.2 Disassembly, Inspection and Assembly of Oil Pot (Oil Cooling
System):
4.7.2.1 Disassembly of Oil Pot
1. Release the Oil-discharge Bolt to drain out the oil from engine.
(Figure 4-7-4)
Figure 4-7-4