82
replace the shaft arm immediately.
In case of slight rust, clean out the rust and dirt on
the surface, then repaint.
3、Inspection of the Nylon Bush and Liner Pipe of Upper
and Lower Shaft Arms.
Nylon Bush must seamlessly match the liner pipe of
the Shaft Arm. If found loosen, the nylon bush must
be replaced. (Figure 4-6-8)
Figure 4-6-8
1.Liner Pipe 2.Nylon Bush
Liner Pipe must seamlessly fit into the Nylon Bush.
In case of looseness, please replace with new nylon
bush.
If rusted, the liner pipe must be replaced.
4、Inspeciton of Turning Joint:
Check if the Front Wheel Shaft in connection with
Summary of Contents for 450ATV-2
