
SAFE OPERATION 1-1
SAFE OPERATION
All operators, including experienced UTV drivers
or passengers, should carefully read and fully
understand this
User’s Manual, and operate
strictly as the manual states in order to achieve
best performance and avoid accidents. Others
who will use this UTV should be trained how to
operate the UTV and be required to read this
manual before operation.
1. Safety Instructions:
1. Understand this UTV by reading this manual
and understanding all the components of
the vehicle. Only start and operate the
vehicle after finishing reading this manual.
2. Pay close attention to the warning and caution
labels on the UTV.
3. Understand completely and learn to use the
safety devices (roll-over protective structure,
seat belts), and never change original safety
devices. If safety devices are damaged,
consult your local dealer for replacement.
Always use seat belts.
①
Roll-over protective structure
;
②
Seat belts
;
4. Do not wear loose articles of clothing during
operation, as these can be drawn into
moving parts on the vehicle and could cause
a severe injury to occur.
You should wear protective devices, such as
helmet, boots, eye protection, ear protection,
gloves, and etc.
5. Only a qualified driver should operate this
UTV. Never operate after drinking, using
drugs or controlled products, or while
fatigued.
6. Always perform the pre-operation checks as
following:
1) Check seat belt for worn or damaged, if
necessary, replace it.
2) Check brakes, throttle, brake pedal and
other
mechanical
parts
for
proper
operation.
If
you
discover
any
irregularities, replace related parts as
necessary. Periodically check the fittings
and fasteners.
3) Check engine oil level and engine coolant
level.
4) Check that the UTV is equipped to handle
the surroundings.
5) Check and keep vehicle clean. Sludge,
grease and debris can cause a fire and
severe injury.
7. Passenger quantity and loading:
1) Only the driver and one passenger inside
cab. It is suggested that children under
age of 5 not be allowed as a passenger.
8.
Single-
row vehicle’s loading limit is 746lbs
(330KG).Reduce loading weight according
to road condition. Never exceed the weight
limits for operation.
9. Never allow unauthorized persons to repair
Summary of Contents for VECTOR 500
